STEP 4- Once the paint is dry its time to piece it all together.
Start by adding a smaller support piece to the larger Filigree stand. Repeat on both sides.
STEP 6- Turn stand upside down and glue the small circle into place, don't worry if it looks a bit messy with glue all over the place it will all dry clear and you can add some paint on top of it !!
Add the circle
STEP 7- Turn the stand upright again and run a glue line along the top of stand and slide the small CUT circle.
STEP 8- Add glue on the top of circle and side of arms, then slot the larger cut circle on top.
STEP 10-Run some glue along the top end and add the top to it.
STEP 11 - Now for the last piece of Birdcage window, I cut the little tops of the top and glued it to the side of cage so it looks like an open door. Now this is just an example. If you want a closed cage then you just glue it with the rest like I did in previous post.
Set to dry completely ! Add your little cup hook to the top of roof '
Now for the fun part .........decorating...
STEP 13- Take out your prima vine and turn that gorgeous backing over.
STEP 14- You should now have 5 triangles for the roof , don't worry if they are a bit out of size as you can trim that after its been glued.
Add some glue to the roof and add the pieces.
STEP 15- Run some glue along the bottom end of roof and add the pearl strip, this is a bit fiddly so its important to have that sticky glue.
Cut 5 smaller pieces and add along the joints of roof. Also a bit fiddly but with some sticky glue it should work OK.
FINISHING TOUCHES- I cut the prima flower vine in smaller pieces and added them to the cage as I went along. Just have a play there is no right or wrong.